TUNGSTEN SERIES Robust Indoor & Outdoor LED Video Walls

Overview

Vanguard’s Tungsten cabinet is available in P1.9 indoor, P2.5 indoor, and P3.9 indoor/outdoor. The Tungsten series features edge corner protectors and slightly raised modules to provide protection for the edges. A protective resin coveringresults in a highly impact resistant LED Display. Tungsten is the durable cabinet that the display industry has been waiting for as it can withstand the rigors of any environment. The cabinet is front or rear serviceable and has a die-cast aluminum frame. The power supply module can easily be swapped as a single unit by detaching 4 clips, pulling the PSU and replacing it with a new one. LED modules can be quickly removed using a glass suction cup tool and replaced with a new module. The 8 point integral locking system enables quick assembly as well as precise alignment. The user friendly internal side locks allow for curvature up to 5 degrees concave or convex. Aluminum modules improve flatness uniformity which allows for the protective resin encasement to be as flat and uniform as possible. Aluminum modules also improve heat dissipation over traditional modules.

Additional Features

  • Fold-over edge protectors for keeping cabinet corners protected during set-up and tear down.
  • Curvable 5 degrees concave or convex.
  • Low Power Consumption.
  • 14+-bit gray scale.
  • Removable PSU and data housing.
  • No internal ribbon cables.
  • Superb color & brightness uniformity.
  • Refresh rate minimum of 2880Hz
  • Contrast Ratio: 3000:1

Technical Specifications

Pixel Pitch

P1.9

P2.5

P3.91

LED Type

SMD1R1G1B

LED Configuration

3 in 1

Pixel Density

262,144/m²

160,000/m²

65,536/m²

Module Size

9.84" x 9.84"

Module Resolution

128 x 128

100 x 100

64 x 64

Lifetime to half Brightness

100,000 hrs

Contrast Ratio

3,000:1

Brightness

800 Nits

4500-5000 Nits

Viewing Angle

 

 

 

Cabinet

Cabinet Material

Die Cast Aluminum

Cabinet Size

19.8" x 19.8"

Cabinet Resolution

256 x 256

200 x 200

128 x 128

Min. Viewing Distance

6.3 ft.

8.25 ft.

13 ft.

Modules Per Cabinet

4

Cabinet Weight

19.1 lbs

Service Access

Front or Rear

IP Rating

IP30

IP65 Front/IP54 Rear

Internal Operation

Driving Method

1/15th Scanning

Grey Scale

14 bit

IC Driver

Chipone 2053

Refresh Rate

>2880Hz

Frame Frequency

60Hz

AC Power

Source Voltage

100-240V, 50-60Hz

Max Power Consumption

200W

Avg. Power Consumption

100W

Environment

Operating Temperature

-10° to +50°C

Storage Temperature

-20°C to +60°C

Operating Humidity

20% to 90% RH

Component Overview

Standard Components

  • Nationstar Gold wire LED’s
  • Meanwell auto switching Power Supplies
  • ChipOne IC Drivers
  • Glue on Board Lamp Protection (indoor only)