Rhodium 16:9 Aspect Ratio Direct View LED Video Indoor Wall
Overview
Since the introduction of our industry leading Rhodium LED Video Display Series, this 16:9 aspect ratio cabinet, has been embraced by the market. Rhodium is our best-selling product. The cabinet can be wired internally, allowing for flush wall mounts, or with traditional external wiring. The Rhodium wall can be hung, recessed, and ground supported. The Rhodium series is without a doubt the most unique, versitile, well thought out, LED cabinet the market.
16:9 Native Aspect Ratio
Every cabinet in Vanguard’s Rhodium LED Video Display Series has a native 16:9 aspect ratio. Therefore, if a display has the same number of cabinets horizontally and vertically, the display will be in a 16:9 aspect ratio. The Rhodium series is available P2.5mm and P4mm indoor pixel pitches.
Unique Ability to Install and Service the Wall, From Either the Front OR the Rear
- The frame can be suspended, wall mounted, recessed, and ground supported
- Quick locks provide for easy installation
- Built in pre-threaded mounting locations in the frame provide for creative mounting solutions
- Magnetic modules make module replacement quick and easy
Additional Key Features of Vanguard’s Rhodium Wall
- Low power consumption
- Heat dissipation design
- Built in seam brightness compensation
- Pixel to pixel color calibration for brightness and color uniformity
- Available in 4K - 8K LED display processing
Unparalleled Picture – (The reason for the whole exercise)
- High gray scale & high refresh rate at even low brightness
- Flicker free for broadcast applications
- Black LED’s offer high contrast ratios and sharp image quality
- Low profile masks offer very wide viewing angles
- 16bit (highest possible) color processing technology
- Superb color and brightness uniformity
- Refresh rates up to 3840Hz
- Contrast Ratio- 5000:1
Technical Specifications
|
|
Gold |
|
|---|---|---|
|
Model Number |
P2.5 | P4 |
|
Spec Sheet |
Download | |
|
Pixel Pitch |
2.5mm | 4mm |
|
Physical Density |
160,000 pixel/m2 | 62,600 pixel/m2 |
|
LED Shape |
SMD1R1G1 Black | SMD2121 Black |
|
LED Configuration |
3 in 1 | 3 in 1 |
|
Module Size |
12.6"x7.35" | 12.6"x7.35" |
|
Module Resolution |
128*72 | 80*45 |
|
Driving Method |
1/18 Scanning | 1/10 Scanning |
|
Cabinet Size |
25.2"x14.7" | 25.2"x14.7" |
|
Cabinet Resolution |
256*144 | 160*90 |
|
Module Quantity |
4 | 4 |
|
Cabinet Weight |
19.1 lbs | 17 lbs |
|
Cabinet Material |
Die Cast Aluminum | Die Cast Aluminum |
|
Brightness |
800 Nits | 800-1200 Nits |
|
View Angle |
140°/140° | 140°/140° |
|
Gray Scale |
14-16 bits | 14-16 bits |
|
|
AC220V -AC110V | AC220V -AC110V |
|
Power Source Voltage |
||
|
|
50-60Hz | 50-60Hz |
|
Max Power Consumption |
104W | 200W |
|
Average Power Consumption |
55W | 100W |
|
Minimum Viewing Distance |
8.3′ | 20′ |
|
IC Driver |
MB15153 or Chipone 2053 | MBI5153 |
|
Refresh Rate |
1920-3840Hz | >2000Hz |
|
IP Rating |
IP31 | IP31 |
|
Lifetime to Half Brightness |
100,000 Hours | 100,000 Hours |
|
Operating Temperature |
–10°C to +50°C | –10°C to +50°C |
|
Storage Temperature |
–20°C to +60°C | –20°C to +60°C |
|
Operating Humidity |
20% to 90%RH | 20% to 90%RH |
Component Overview
Standard Components
- Nationstar Gold wire LED’s
- Meanwell auto switching Power Supplies
- ChipOne IC Drivers
- Add Gold or Copper wire LED’s
- Auto Switching Power supplies
- MBI IC drivers.